Table Des Matières - Pulmic TAURUS AIR+ Manuel D'instructions

Y FOR V ARIETIES OF OPER ASSEMBLY FOR VARIETIES OF OPERATING
AS AS SEMBL AS SEMBL SEMBL Y FOR V SEMBL Y FOR V Y FOR V
AS AS SEMBL Y FOR V
1. Assembly for spraying
As shown in Fig.1, connect spraying pipe to the machine.
2. Assembly for dusting
(1) Remove the two wing nuts fixed on the chemical tank and take
down the tank.Change spraying lid plate and the pressing lid for
dusting lid plate and the lowercover of chemical tank, then assem-
ble chemical tank and screw down wing nuts, asshown in Fig.2
(2) As shown in Fig.3, connect dusting pipe to the machine. 2
ARIETIES OF OPER ARIETIES OF OPER
ARIETIES OF OPER ARIETIES OF OPER
Figure 1
Figure 2
Figure 3
-05-
A A A A A TING TING TING TING
TING