Specific Safety Instructions; Product Information; Technical Specifications - VONROC WB502XX Traduction De La Notice Originale

1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non observance
of the instructions in this manual.
Maximum permissible load 130 kg
(30kg pegboard, 70kg work surface,
30kg drawer). Do not exceed the
maximum permissible load.
Use the workbench on flat and level
ground.
Support long workpieces, for example
with another workbench.
Do not stand on top or use as ladder.

SPECIFIC SAFETY INSTRUCTIONS

• Make sure that all screws, nuts and bolts are
fitted and securely tightened.
• The plastic feet should be fitted to the ends of
the legs to protect against slipping.
• Locate bench in a suitable work area. Keep
children and unauthorised persons away from
the work area.
• This unit should be securely anchored to a wall
or floor with suitable fasteners, which are not
included.
• Keep the work area clean, uncluttered and
ensure there is adequate lighting.
• Do not use the workbench as seating, as a step
stool, step ladder or other stand aid.
WWW.VONROC.COM
• Do not exceed rated load capacity: total 130kg
(30kg pegboard, 70kg work surface, 30kg
drawer).
• Heavy loads must be placed down carefully
onto the work bench.
• Distribute weight evenly across the worktop. Do
not apply an unbalanced load that could cause
the unit to tip over.
• Support long work pieces, for example with
another workbench.
• Only set up on solid, level surfaces.
• All four legs must be in contact with the ground,
use shims if necessary.
• Be sure the workpiece is properly secured
whilst working.
• Only push down with your hands to stabilise the
worktop.
• Do not brace table with your feet.
• Do not undertake work on the bench without
the workpiece being adequately secured. Use
clamps or a vice (not included) to secure the
workpiece.
• Do not expose to rain or use in damp locations.
Do not use the bench outdoors.
• Save these instructions. Refer to them frequently
and use them to instruct others who may use
this accessory. If you loan someone this acces-
sory, loan them these instructions also to prevent
misuse of the product and possible injury.

2. PRODUCT INFORMATION

Intended use
This product is designed and intended for domestic
use, for general purpose workbench use in home
and garden environments and for hobby purposes.
This workbench is not developed for professional
use. The Workbench must be handled, cared for
and maintained in accordance with these instruc-
tions. Any other use is deemed improper and may
result in damage to property or personal injury.

TECHNICAL SPECIFICATIONS

Model No. WB502XX
Total 130kg (30kg pegboard,
Max. permissible load 70kg work surface, 30kg
drawer).
Overall dimensions 1154 x 563 x 1447 mm
Weight 24.9 kg
EN
9