Publicité
g Operating Instruction
Package contents:
1x USB 2.0 hub/ Card Reader
1x operating instructions
System requirements:
• Operating system Mac OS 9.x or higher
• Free USB connection, preferably USB 2.0
Safety instructions:
You have acquired a high-quality, electronic accessory for your
computer which is universally useable. Please observe the following
points:
• Protect the device against pressure and impact.
• Do not expose the device to moisture. The precision
contacts can be damaged.
• To not connect the device if the device or the
connection lead are damaged.
• The device or other components must only be
repaired in a specialist shop or in a service centre.
• Make sure that all connected devices are CE-marked.
• Avoid heat sources and direct sunlight exposure.
• Attention! Keep electrical equipment and electronic
devices out of reach of children.
• Attention! Keep packaging materials out of reach of
children! Danger of suffocation!
Putting into operation:
1. Switch on your PC and wait until it has started up.
Connect the USB hub with your PC/notebook by
means of the enclosed USB cable.
2. Please make sure that no terminal device is
connected when you install the USB hub.
Note: When connecting and disconnecting the USB hub and
the USB devices, different messages can appear on your
screen. Contact a specialist or consult the manual of your
computer or operating system if you have any questions.
3. Now you can connect your USB peripheral devices
(e.g. printer, scanner etc.) to the USB hub. When installing
the devices you have to install every devices separately, i.e.
please wait until the drivers of the respective device have
been completely installed before installing another device.
4. It is also recommendable – as far as this is possible –
to supply the terminal devices which are connected to
the hub with power of their own.
Note: When connecting the USB hub, you do not have
to install drivers. A driver may be necessary for the connected
USB devices.
This one can be obtained from the manufacturer of the
respective device or when purchasing such a device.
Card Reader:
without adapter fits:
Memory Stick(TM); Memory Stick Duo(TM);
High Speed Memory Stick(TM); Memory Stick Pro(TM);
Memory Stick Pro Duo(TM); Memory Stick ROM(TM);
Memory Stick Pro Micro (TM); Multimedia Card; MMC Micro;
HS-MMC; MMC-Mobile; Secure Digital; SmartMedia;
XD-Picture Card
with adapter (not included) fits:
RS MultimediaCard; Mini SD; Micro SD; T-Flash
Caution:
Make sure that the data transfer has ended before you remove the
memory card from the card reader. Always use the function "Eject"
(click right on the card reader drive where the memory card is insert,
then click on "Eject") of the Explorer in order to remove the memory
card.
If you want to use the Card reader with another operating system
than those listed above, please check first if you can find more
information or drivers in the service area at www.hama.de.
Support and contact information
If products are defective:
Please contact your dealer or Hama Product Consulting if you have
any claims.
Internet/World Wide Web:
Product support or product information can be found at www.hama.
com
Support hotline – Hama Product Consulting::
Tel. + 49 (0) 9091 – 502-115
Fax +49 (0) 9091 – 502-272
e-mail: produktberatung@hama.de
3
Publicité
