Problem
The dishes
are not clean.
Cloudiness on
glassware.
White spots
appear on dishes
and glasses.
Black or grey
marks on dishes
Detergent left in
dispenser
The dishes aren't
drying
Possible Causes
Not enough detergent
was dispensed.
Items are blocking
the movement of
the spray arms.
The filter combination
is not clean or is not
correctly fitted in the
base of wash cabinet.
This may cause the spray
arm jets to get blocked.
Combination of soft
water and too much
detergent.
Hard water area
can cause limescale
deposits.
Aluminium utensils
have rubbed against
dishes
Dishes block
detergent dispenser
Improper loading
Dishes are removed
too soon
30
What To Do
Use more detergent, or change
your detergent.
Rearrange the items so that the spray
can rotate freely.
Clean and/or fit the filter correctly.
Clean the spray arm jets.
Use less detergent if you have soft
water and select a shorter cycle to
wash the glassware and to get
them clean.
Add more detergent.
Use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in
the directions.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can come out. Take out the dishes
until the inside temperature is safe
to touch. Unload the lower basket
first to prevent the dropping water
from the upper basket.