Symbols On The Instrument And In The Instruction Manual; Introduction - Beha-Amprobe SF100 Mode D'emploi

Symbols on the instrument and in the instruction manual:

Warning of a potential
danger, comply with users
manual.
Caution!
Dangerous voltage.
Danger of electrical shock.
Reference. Please use
utmost attention.
Symbol for the marking of
electrical and electronic
equipment
(WEEE Directive).
CAT III
Measurement Category III is applicable to test and measuring circuits
connected to the distribution part of the building's low-voltage Mains
installation.Examples are measurements on distribution boards (including
secondary meters), circuit-breakers, wiring, including cables, bus-bars,
junction boxes, switches, socket-outlets in the fixed installation

Introduction

The BEHA-AMPROBE SF100 is the ideal tracing instrument for sorting out
single wires in a bundle of cables, tracing lines in overhead installations,
tracing and finding cables in walls and assigning fuses. Functioning by
means of marking cables under test by a coded signal which is directly
picked up and indicated by the receiver, exact and sensitive localisation of
electrical lines and their identification can be guaranteed.The set has been
built in compliance with the most up-to-date Directives EN 61010, IEC
61010 and ensures safe and reliable operation. The BEHA-AMPROBE
SF100 Set is a useful aid to the electrician on site, the service technician in
industry and handicraft or for hobbyists working in electronics to carry out
maintenance work, new installations, commissioning, and fault finding.
Features
Coded patented technology for quick and accurate :
• Sorting out of single wires in a bundle of cables and trace lines in
overhead Installations.
• Tracing and finding of cables in walls.
• Assigning current circuits to fuses within fuse panels.
• Voltage range up to 250V
Equipment protected
throughout by double
insulation or reinforced
insulation.
Conformity symbol, the
instrument complies with
the valid directives. It
complies with the EMC
Directive and the Low
Voltage Directive with
their valid standards.
2