Warranty Policy - Napa 6-1078 Mode D'emploi

OPERATION
This im p act wrench is rated at
1" USS bolt size. Rat i ng must be
down grad e d for spring U bolts,
tie bolts, long cap screws, double
depth nuts, badly rust e d condi-
tions and spring fas t en e rs as
they absorb much of the impact
power. When possible, clamp or
wedge the bolt to prevent spring-
back.
Soak rusted nuts in pen e t rat i ng
oil and break rust seal before
removing with im p act wrench.
If nut does not start to move in
three to five sec o nds, use a larger
size impact wrench. Do not use
impact wrench be y ond rated
ca p ac i t y as this will dras t i c al l y
reduce tool life.
WARRANTY
For a complete list of authorized air tool repair centers please visit www.toolwarrantyrepair.com.
important: DO nOt return DeFective prODuct OutSiDe OF OriGinAl One (1) yeAr
WArrAnty periOD tO plAce OF purchASe.

WArrAnty pOlicy:

period of One (1) Year from the date of original purchase. We will replace, at our option, any part which proves to be defec-
tive in material or workmanship. Repairs or replacements are warranted as described above for the duration of the original
warranty period. In the unlikely event a replacement unit is required during this One (1) year period, return the unit to
your local NAPA Auto Parts Store for a replacement. This warranty does not apply to products which have been subjected to
abuse, misuse, modification, neglect, lack of maintenance, use in a production-related service, or repaired by anyone other
than an Authorized Master NAPA Professional Air Tool Service Center.
For complete listing of Authorized Master Repair Centers, see enclosed Customer Warranty Repair Form, or
visit www.toolwarrantyrepair.com
PLEASE REVIEW ALL WARNING INSTRUCTIONS PRIOR TO OPERATION. SAVE ThIS mAN U AL fOR fUTURE REf ER ENCE.
6-1078
The reversing lever is used to
change the direction of the tool.
When the valve is pushed to the
left, the tool is in a for w ard or
right hand direction. When the
valve is pushed to the right, the
direction is reverse or left hand.
NOTE: actual torque on a fas-
tener is directly related to joint
hardness, tool speed, condition
of socket and the time the tool is
allowed to impact.
use the simplest possible tool-
to-socket hook up. every connec-
tion absorbs energy and reduces
power.
Forward/Reverse
Lever
This NAPA Professional Air Tool is warranted against defects in material and workmanship for a
Air
Inlet
5
Always turn off the air supply, drain
hose of air pressure and detach tool
from air supply before installing,
removing or adjusting any part or
accessory on this tool, or before
performing any maintenance on
this tool.
S
pecificationS
Max. Free Speed ...........4,500 RPM
Max. Torque ................1,600 ft. lbs.
Working Torque ...........500-1,200 ft. lbs.
Air Inlet ........................1/2"NPT
Min. Hose Size .............1/2" I.D.
Avg. Air Cons. ..............7.9 CFM
Recom. Air Pressure .....90 psig (6.2 bar)
Weight. ........................14.8 lbs.
Length ...........................18.4"
Sound Level ..................94 dBA
Rev. 02/18/14