To Select The Source; To Edit The Input Source Name - Samsung LN-S4092D Mode D'emploi

To Select the Source

Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.

To Edit the Input Source Name

Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER
2. Press the ENTER
Press the or buttons to select signal source, then press the ENTER
When you connect equipment to the LCD, you can choose between the following sets of
jacks: TV, AV1, AV2, S-Video1, S-Video2, Component, PC, HDMI1, or HDMI2 on the
TV's rear panel.
HDMI1 or HDMI2 input can only be selected when the external device is turned on and
connected via HDMI.
AV2/S-Video2 is placed on the side of the TV.
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
1. Press the MENU button to display the menu.
Press the ENTER
Press the or buttons to select "Edit Name", then press the ENTER
2. Press the or buttons to select "AV1", "AV2", "S-Video1", "S-Video2",
"Component", "PC", "HDMI1" or "HDMI2" input jack, then press the
ENTER button.
3. Press the or buttons to select "VCR", "DVD", "D-VHS", "Cable STB", "HD
STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver", "GAME",
"Camcorder", "DVD Combo", "PC", "VOD STB", or "TV" input source, then press
the ENTER button.
Press the EXIT button to exit.
English-22
button to select "Input".
button to select "Source List".
button to select "Input".
button.
button.