To Select the Source (depending on the model)
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
To Edit the Input Source Name (depending on the model)
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER button to select "Input".
2. Press the ENTER button to select "Source List".
Press the
or
buttons to select signal source, then press the ENTER button.
When you connect equipment to the LCD, you can choose between the following sets of
jacks: TV, AV1, AV2, S-Video1, S-Video2, Component, PC, HDMI1, or HDMI2 on the
TV's rear panel and AV2, S-Video on the TV's side panel.
HDMI1 or HDMI2 input can only be selected when the external device is turned on and
connected via HDMI.
27 inch model only supports AV, S-Video, Component, PC, HDMI1, and HDMI2.
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
1. Press the MENU button to display the menu.
Press the ENTER button to select "Input".
Press the
or
buttons to select "Edit Name", then press the ENTER button.
2. Press the
or
buttons to select "AV1", "AV2", "S-Video1", "S-Video2",
"Component", "PC", "HDMI1" or "HDMI2" input jack, then press the
ENTER button.
27 inch model only supports AV, S-Video, Component, PC, HDMI1, and HDMI2.
3. Press the
or
buttons to select "VCR", "DVD", "D-VHS", "Cable STB", "HD
STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver", "GAME",
"Camcorder", "DVD Combo", "PC", "VOD STB", or "TV" input source, then press
the ENTER button.
Press the EXIT button to exit.
English-22