Samsung LN-S4092D Mode D'emploi page 29

Selecting a Signal Source (External A/V) for PIP.
Swapping the Contents of the PIP and Main image
Changing the PIP Channel
Changing the Position of the PIP Window
Changing the Size of the PIP Window
3. Press the or buttons to select "Source", then press the ENTER
Select the source of the sub picture (PIP) by pressing the
press the ENTER
MAIN: TV(Analog) / PIP: HDMI(1, 2)
The sub picture can serve different source selections based on what the main picture is set to.
In the PIP Source selection menu, 'TV' represents both analog and digital tuning.
4. Press the or buttons to select "Swap", then press the ENTER
5. Press the or buttons to select "Channel", then press the ENTER
Press the or buttons to select the desired channel in the PIP window.
Press the ENTER
MAIN: AV(1, 2), S-Video(1, 2), Component / PIP: TV(Digital)
•
MAIN: PC, HDMI(1,2) / PIP: TV(Analog)
•
The channel can be active when the sub picture is set to TV.
•
Press the PIP Channel buttons on the remote control.
6. Press the or buttons to select "Position", then press the ENTER
Press the or buttons to select the desired PIP window position.
Press the ENTER
The Double ( ), Double Wide (
7. Press the or buttons to select "Size", then press the ENTER
Press the or buttons to select the desired size of the PIP window.
Press the ENTER
Press the EXIT button to exit.
If main picture is in PC mode, Size is not available.
• You cannot choose the PIP option.
• You may notice that the picture in the PIP window becomes slightly unnatural when
you use the main screen to view a game or karaoke.
• You can adjust picture position only by using the
English-27
button.
buttons.
buttons.
) mode cannot be selected in Position mode.
button.
button.
or buttons and
button.
button.
button.
button.
size menu.