Litex C-ST52BNK5D1 Mode D'emploi page 15

OPERATING INSTRUCTIONS
3.
Use the fan reverse switch, located on LED light kit
(U), to optimize your fan for seasonal performance.
To use the reverse switch, remove pull chain
extensions (V), then finial (Q), finial plate (P) and
hex nut (O) from threaded rod (N). Remove glass
shade (J).
A ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat
setting in winter without feeling a difference in your
comfort.
NOTE: Wait for fan to stop before moving the
reverse switch.
In warmer weather, setting the reverse switch in
4a.
the LEFT position will result in downward airflow
creating a wind chill effect.
4b. In cooler weather, setting the reverse switch in the
RIGHT position will result in upward airflow that can
help move stagnant, hot air off the ceiling area.
IMPORTANT: Reverse switch must be set either
4c.
completely LEFT or completely RIGHT for fan to
function. If the reverse switch is set in the middle
position, fan will not operate.
3
J
4a
4c
15
U
N
Reverse Switch
P
O
Q
4b
V