System Overview; Description; Component Identification - Maxtec MaxFLO2 LOW FLOW R223P01 Manuel D'utilisation Et Mode D'emploi

1.0 SYSTEM OVERVIEW

1.1 Description

The MaxFLO is a compact air/oxygen gas mixing device. The MaxFLO
2
precise mixing of medical grade air and oxygen through two separate gas flowmeters
controlled by two separate flow control knobs. The sum of each individual gas flow
yields the total flow of gas, i.e. 5 LPM of oxygen and 8 LPM of air is a total flow of 13
LPM. Resulting oxygen concentration can be determined in several ways:
• With use of an oxygen analyzer/monitor mounted to the mixed gas
analysis port.
• Referencing Table 1 in Section 2.2 of this Operating Manual.
Additional features and operational benefits include:
• Quick and easy intermittent or continuous oxygen measurements.
• No continuous bleed required, less wasted gas.
• Durable, compact design.
• Low maintenance.

1.2 Component Identification

1
2
3
4
5
1 Medical Air Flowmeter
Medical Air Flow Adjustment Valve
2
3 Medical Air Gas Inlet
4 Male DISS Fitting
22mm Male/15mm Female Conical
5
Outlet Fitting
6 Oxygen Flow Meter
866.4.Maxtec
9
6
7
8
7 Oxygen Gas Inlet
Oxygen Flow Adjustment Valve
8
9 IV Pole Clamp
10 Mixed Gas Analysis Port
Mixed Gas Analysis Port Cover
11
(Shown in open position)
www.maxtec.com
provides
2
11
10
1