A / B Connection Diagram - Telecom Behnke B-Smart Instructions

1.5. a / b connection diagram

Camera with a / b door intercom
Camera with B-Smart app, the video signal on the app does not support audio transmission
Basic electronics a / b
a/b line
Open door function
www.behnke-online.com
*
Attention: Please remove the insulation before connecting
the wires.
Program the alarm input to activate relay 1 when triggered. To
do so change the following settings at your door intercom:
–
* 0000 ▸ Enter set-up mode
17 8 # ▸ Alarm input triggers identical function as key 4
24 *71 # ▸ Key 4 triggers relay 1
* ▸ Exit set-up mode
Camera module
Network
12 V ~
Instructions B-Smart
Introduction
RJ 45
GB
40