GE WR6M374 Guide D'utilisation Et D'entretien page 11

2
TRANSFER BOTTOM HINGE BRACKET TO
THE LEFT
Remove the bottom
hinge, screws and
shim(s) from the
right side and
reassemble them
on the left side of
the cabinet.
ATTENTION:
The screws must
be properly tightened. Turn the screws until
snug. Then tighten the screws a minimum of one
full turn using both hands.
3
TRANSFER CENTER HINGE BRACKET
TO THE LEFT
a. Remove the two
screws on the
opposite side.
b. Remove the
center hinge, shim
and screw(s).
c. Reassemble
the center hinge
on the left side.
CAUTION: When assembled correctly, the
hinge is tight against the cabinet.
ATTENTION: The screws must be properly
tightened. Turn the screws until snug. Then
tighten the screws a minimum of 1/2 turn using
both hands.
REVERSE DOOR HANDLES
Top
Left Side
1
TRANSFER FRESH FOOD DOOR HANDLE
TO THE RIGHT
To remove the handle...
• Remove the screw on the bottom of the
handle.
• Remove the handle insert and remove the
screw holding the handle.
• Remove the two screws holding the handle to
the top of the door.
After removing the handle...
• Remove the screws
from the right edge
of the door top and
insert them into the
handle screw holes
on the left side.
• Remove the plug
button from the left
edge of the door and
insert it into the
hole on the opposite
side.
• Transfer the
button on the door
to the opposite side.
Reinstalling the
handle...
• Attach the handle to the right side of the door,
reversing the above procedure.
Top
Right Side
Plug Button
Screws for
handle holes
Button
(continued next page)
11