Concluding Works; Software Configuration - TIPTEL 2S0 Instructions D'installation

.UK.
·
The optional assignment of subscriber numbers to the connec-
tions on the expansion modules means that it is normally no
longer necessary to change the wiring. Assignment changes
can be performed easily using the software.
·
For strain relief, the cable should be secured to the plastic clips
in the wiring compartment using a cable fastener.

Concluding works

After installing a new expansion module, you should include the
new component in the labelling on the lid of the unit, e.g. by
adding "2SO", so as to know which module is fitted in which
slot when the unit is closed.
After completing all the work, you can re-connect the System and
the other devices to the 230v mains network. The two upper LEDs
of the newly installed module light up. This means that their
presence has been recognised but they have not yet been
configured.

Software configuration

In its present state, the expansion module has no or only a very lim-
ited functionality. During the last step of the installation, the module
has to be configured according to the user's local and individual
requirements. The configuration of the module is described in detail
within the user manual for the telephone system tiptel 4011 XT.
Expansion module tiptel 2S0
16
.UK.