SUPPORTPLUS RC 8 Mode D'emploi page 4

USER MANUAL
GB
RC 8 - UNIVERSAL REMOTE CONTROL
Thank you for having purchased our new RC 8 remote control.Your RC 8 is powered by 2 type
"AAA" batteries (not included) and can be used for the remote control of up to 8 different devi-
ces, including TV, video recorder, DVD player, satellite receiver or cable box, CD player, tuner
(radio), tape recorder and amplifier.
Easy SET -UP to operate your TELEVISION
1. Insert 2 new alkaline 1.5V batteries AAA/LR03 into the back of your RC 8; Follow the markings
in the battery compartment.
2. Switch on your TELEVISION.
3. Look for the brand name of your TELEVISION (e.g. Sony) on the attached list with codes.
4. Next to the brand name you will find one or more 3-digit code numbers which have to be
entered into your RC 8 remote control.
5. Press the key on your RC 8 (for about 5 seconds) until the LED flashes twice.
TV
6. Enter the first 3-digit code from the list (e.g.
on your RC 8.
7. The LED will flash twice to indicate that the code has been accepted.
8. Aim your RC 8 at your TELEVISION and press the
if your TELEVISION switches off.
9. If your TELEVISION does not react and/or it operates incorrectly, repeat step 3. to step 8. by
entering the next 3-digit code from the list.
10. If none of the 3-digits codes of this form operates your TELEVISION properly, use the "Search
Method" of your RC 8 remote control.
Easy SET -UP to operate your VIDEO RECORDER
The set-up to operate your VIDEO RECORDER is similar to the set-up procedures for your tele-
vision set. Follow the steps 1. until step 10. by using the
word VIDEO RECORDER replacing the word TELEVISION.
Easy SET -UP to operate your SATELLITE RECEIVER
The set-up to operate your SATELLITE RECEIVER or CABLE BOX is similar to the set-up proce-
dures for your television set. Follow the steps 1. until step 10. by using the
and reading the word SATELLITE RECEIVER / CABLE BOX replacing the word TELEVISION.
Easy SET -UP for the control of your DVD PLAYER
To programme the remote control to operate your DVD PLAYER, proceed as described for the
television set. Complete steps 1 to 10 using the
PLAYER.
Easy SET -UP to operate your CD-PLAYER
The set-up to operate your CD-PLAYER is almost similar to the set-up procedures for your
television set:
1. Insert 2 new alkaline 1.5V batteries AAA/LR03 into the back of your RC 8; Follow the markings
in the battery compartment.
2. Switch on your CD-PLAYER.
3. Look for the brand name of your CD-PLAYER (e.g. Sony) on the attached list with codes.
4. Next to the brand name you will find one or more 3-digit code numbers which have to be
entered into your RC 8 remote control.
5. Press the /SHIFT key on your RC 8.
6. Press the CD/
TV
7. Enter the first 3-digit code from the list (e.g.
on your RC 8.
8. The LED will flash twice to indicate that the code has been accepted.
9. Aim your RC 8 at your CD-PLAYER and press the
your CD-PLAYER switches off.
10. If your CD-PLAYER does not react and/or it operates incorrectly, repeat step 3. to step 9. by
entering the next 3-digit code from the list.
11. If none of the 3-digits codes of this form operates your CD-PLAYER properly, use the "Search
Method" of your RC 8 remote control.
key (for about 5 seconds) until the LED flashes twice.
for Sony) with the number keys
3 0 8
key.Your RC 8 is set up correctly
key on your RC 8 and reading the
VCR
key on your RC 8. For TV, simply read DVD
DVD
for Sony) with the number keys
8 4 2
key.Your RC 8 is set up correctly if
key on your RC 8
SAT