Specifications - Kenwood DPX794BH Mode D'emploi

Troubleshooting
Symptom
No response from Alexa after
the voice input.
Wrong response from Alexa.
"DISCONNECTED"
Not able to connect or • Be sure the audio device is connected via Bluetooth.
reconnect to Alexa mobile
application.
• Perform the one-time setup process again. See "Setup for
• Turn off, then turn on the unit and try to connect again.
• For iOS device, make sure ALEXA source or iPod BT source
46
ENGLISH
Remedy
Amazon cloud was unable to analyze the voice input.
Alexa misunderstood what was said or did not catch
the entire request or sentence spoken. Please try again.
(Page 28)
Be sure to connect your smartphone to the unit via
Bluetooth. (Page 22)
Select the audio device from [AUDIO SELECT] in
[BT MODE]. (Page 26)
the first time" on page 28.
is selected.

Specifications

:
FM Frequency Range
Usable Sensitivity
(S/N = 30 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response (±3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
Digital Frequency Range
FM
Frequency Response (±3 dB)
Signal-to-Noise Ratio (STEREO)
AM Frequency Range
Usable Sensitivity (S/N = 20 dB) 29 dBμ (28.2 μV)
Digital Frequency Range
AM
Frequency Response (±3 dB)
Signal-to-Noise Ratio (STEREO)
87.9 MHz — 107.9 MHz (200 kHz step)
7.2 dBf (0.63 μV/75 Ω)
15.2 dBf (1.58 μV/75 Ω)
30 Hz — 15 kHz
68 dB
40 dB
87.9 MHz — 107.9 MHz (200 kHz step)
20 Hz — 20 kHz
75 dB
530 kHz — 1 700 kHz (10 kHz step)
530 kHz — 1 700 kHz (10 kHz step)
40 Hz — 15 kHz
70 dB