Parts Description - Kalorik WM 42054 Manuel D'utilisation

PARTS DESCRIPTION

See page 2.
BEFORE THE FIRST USE
 Before using the appliance for the first time, remove and peel off all
promotional and packaging materials. Check that the cooking
plates are clean and free of dust.
 Clean the waffle maker (See "Cleaning and Care") and place the
unit on a flat, dry, and heat-resistant surface.
 It is recommended to heat the waffle maker for about 10 minutes
without any foodstuff on its surfaces. This helps to eliminate any
grease that may have adhered during manufacturing and to
eliminate the "new" appliance smell.
 Ventilate the room during this period. When your grill is heated for
the first time, it may emit slight smoke or odor. This is normal with
many heating appliances. This does not affect the safety of your
appliance.
OPERATION
 Place the unit on a flat, dry, and heat-resistant surface.
 Close the appliance and plug into the electrical outlet. The red
power light will come on to indicate that the appliance is on.
 Set the thermostat to the desired position from "MIN" to "MAX" (MAX
being the hottest). When the green pilot light goes on, it means that
the desired temperature is reached. During use, this light will come on
and off regularly. This simply means that the thermostat is regulating
the appliance's temperature.
Caution: during operation, the baking plates heat up. Use caution to
avoid burns. Use oven mitts and heat-resistant wooden or plastic utensils!
 Open the appliance and lightly brush the plates with oil or non-stick
cooking spray.
 Pour some of the batter evenly onto the middle of each well, on the
bottom baking plate, but not all the way to the edges! The batter
may overflow if too much is poured as it expands while cooking.
www.KALORIK.com
WM 42054 / WM 42583 - 170120
5