Technical Specifications - Eurotops 26585 Mode D'emploi

Micro digicam avec détecteur de mouvement
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

13. SOUND RECORDING
Sound recording
3. In standby mode (red light), short press button 1.
4. The device vibrates once, the red light goes off, the blue light flashes 3 times and goes
off. The sound recording starts.
Stop sound recording
Short press button 1. The blue light is on, the device vibrates once, then the blue light goes
off; the recording stops and saves the file. The red light (standby mode) is on again.
Recording again :
Short press button 1.
14. HOW TO VIEW RECORDED DATA ON COMPUTER
- Make sure the device is well inserted into the USB port of your computer.
- When connecting it to computer, wait a few minutes so that the computer can
recognize it as a removable disk. Do not carry out any operation during the
procedure of recognition.
- If the computer fails to recognize it, connect it to another USB port of computer. If
this other attempt also fails, restart the computer and connect the device to its USB
port.
- Before removing the device from the computer, the removeable disk must be
removed properly and safely.
1. Make sure your computer is turned on.
2. Connect your micro camera to the computer. After connection, it will be detected as
"removable disk".
3. Go to "My Computer'. Then double-click to the removable drive icon corresponding to
the memory of the device.
You can then visualize the photos (photo folder), videos (VIDEO folder), listen to the
sound recordings and select the files that you want to transfer to your computer.
N. TECHNICAL SPECIFICATIONS
VIDEO FORMAT
VIDEO RESOLUTION
VIDEO CODING
PICTURE FORMAT
IMAGE PIX
AUDIO FORMAT
USB
SUPPORT SYSTEM
WORKING HOURS AFTER A
FULL CHARGE
CHARGING VOLTAGE
BATTERY
AVI
1280*960 (30 frames/sec)
MJPEG
JPG 1280*1024
5M
WAV
USB 2.0
Windows me/2000, XP, win 7, 2003/vista
About 60 minutes
DC5V
Lithium-ion, 250mAh, 3.7V

Publicité

Table des Matières
loading

Table des Matières