Setting Time And Date - Eurotops 26585 Mode D'emploi

2. When charging, the blue light (4) flashes.
3. When fully charged, the blue light (4) goes off.
Charging time for next uses:
- To preserve your battery, please use the device until the battery discharges totally,
and charge at its maximum capacity during the 5 first times of use.
- If the micro digicam has not been used for a long time, please fully recharge it before
use.
- If there is not enough battery power or not enough memory, the device will save the
currently recording audio or video first, then power off automatically.
L. SETTING TIME AND DATE
1. Power off your micro camera if it is on.
2. Connect it to the USB port of your computer.
3. Go to "My Computer'. Then double-click the removable drive corresponding to the
memory of the device.
4. Double-click the "Time" file. Then modify the date and time as the format below:
YEAR-MONTH-DATE HOUR: MINUTES:SECONDS (for example: if the date is 31
January 2013 and time is 9:30:30, write 2013-01-31 9:30:30).
5. Save the file.
6. Remove the "removable disk" safely. The next videos, photos and sound recordings
will display the updated time and date.
Note: If the "time" file is absent in the memory of the micro camera or has been
inadvertently deleted, follow these steps to create a new file:
Right-click next to one of the folders "PHOTO", "RECORD" or "VIDEO". In the menu that
appears, click "New" and then "Text Document".
Open "text document" and write the date and time in the format below: YEAR-MONTH-
DAY HOUR: MINUTES: SECONDS
Save it as a text document with the file name: "time".
If the battery is discharged or has not been charged for several days, the time
may reset to factory default settings. In that case, set the correct date and time
again.
M. OPERATION
8. HOW TO TURN ON THE MICRO CAMERA
3. Long press button 1 till the blue and red lights (4) are on and the micro camera vibrates
at the same time.
4. The vibration stops. When the device is initialized, the blue light goes off and only the
red light remains on. The device enters then in standby mode (red light).
Auto Power off
When the device enters stand-by mode and is not used for about 2 minutes, it will shut
down automatically.
4 hours
Notes :