9. HOW TO TURN IT OFF
Long press button 1 till the micro camera shakes. The red light flashes 3 times and goes off.
Note: The latest photos, videos, sound recordings audio will be saved and then the device
will turn off.
10. TAKING PHOTOS
DO NOT COVER THE CAMERA LENS WHEN YOU ARE TAKING PICTURES OR
RECORDING VIDEOS.
3.
Turn on your camera (see section 1: "How to turn on the micro camera").
4.
In standby mode (red light), short press the button 2. The light becomes blue and the
device vibrates; the photo is taken and saved. Then the light becomes red; the device
enters standby mode (red light).
Note : Repeat step 2 as many times as you please to take other photos.
11. RECORDING A VIDEO
Entering video mode
In standby mode (red light), long press button 2 till the device vibrates twice. The red light
flash 3 times and then turns off. Video mode is activated.
Recording a video
Short press button 1 or 3. The red light is on, blinks 6 times and turns off. Video recording
starts then.
Stopping a video
Short press button 2. The red light flashes, the device vibrates and the light becomes solid
red. The video is then stopped and the file is saved. The device enters standby mode (red
light).
12.
VIDEO MOTION DETECTION MODE
-
As soon as this mode is activated, the device becomes very sensitive. Make
sure not to move it after this mode's activation otherwise recording will start.
-
Once the video motion recording starts, the device will record until the battery
is down. To stop recording, see procedure in section "stopping video".
Entering motion detection mode:
In standby mode (red light), short press button 3. The device vibrates 3 times. The blue and
red lights flash 4 times, then go off. The motion detection mode is activated.
Recording motion video:
As soon as the device detects a moving object, the blue light is on, and then goes off. The
device starts recording.
Stopping motion vidéo:
Short press button 3. The blue light is on, the device vibrates once, the blue light is off ; the
video is then stopped and the file is saved. The red light is on (standby mode).