Controls - RIDGID micro LM-100 Manuel De L'opérateur

Battery Life....................................Up to 4,000 Measurements
Batteries........................................(2) AAA
Auto. Laser Switch-Off ..................After 30 Seconds
Auto. Shut-Off................................After 3 Minutes of Inactivity
Dimension ......................................115 x 48 x 28mm
Weight...........................................0.2kg (7oz)
Features
• Area, Volume Calculations
• Indirect Measurement
• Addition/Subtraction
• Display Illumination and Multi-line Display
* Range is limited to 100 m (328 ft.) Use a commercially available target plate
to improve measurement ability during daylight or if the target has poor reflec-
tion properties.
**In favorable conditions (good target surface properties, room temperature)
up to 10m (33 ft). In unfavorable conditions, such as intense sunshine, poorly
reflecting target surface or high temperature variations, the deviation over
distances above 10m (33 ft) can increase by ±0.15mm/m (±0.0018 in/ft).
Figure 1 – micro LM-100 Laser Distance Meter
999-998-391.10_REV. D
(4 1 / " x 1 7 / x 1 1 / ")
2 8 8
• Continuous Measurement
• Min/Max Distance Tracking
• Beep Indication
micro LM-100 Laser Distance Meter

Controls

ON/Measurement
Button
Area/Volume
Button
Continuous
Measurement
Button
Addition
Button
Memory
Button
Measurement
Reference Point
Button
Figure 2 – micro LM-100 Buttons
Indirect
Measurement
Button
Subtraction
Button
Backlight/Unit
Change Button
Clear/Power
OFF Button
5