Wiring; Modes Of Operation - Titon auramode HRV Manuel Produit

Wiring

Communication cable connection to the
Connection to the HRV unit is to screw terminals on the HRV PCB.
Connection to auramode
Powering Up
The auramode is powered by the communication cable from the HRV unit. On powering up the
HRV the controller starts in AUTO mode and displays
HRV unit to complete its start-up procedures.
auramode Controls & Operation
auramode has 4 buttons to control these are used to control and setup auramode. Each button
has multiple functions detained below.
QUICK BUTTON
Cycle Fan Speeds
Toggle Manual / Auto Mode
Clear Filter Messages
Increase Fan Speed
Navigate Menus
Change Settings

Modes of Operation

The auramode has three modes of operation:
1. AUTO Speed in controlled by the programmed schedule (default mode).
2. MANUAL Speed is set manually, either by cycling through the speeds with the
QUICK BUTTON or by using
3. SETUP Used to change settings.
6
auramode
is by a pre fitted plug on the supplied cable.
0V
B
A
12V
INITIALIZING..
to increase and
Yellow
Orange
Green
Black/White
HRV
Connection to HRV
while waiting for the
Enter Setup Menu [Long Press]
Select Menu Item
Fix Setting
Switch to Auto Mode
Decrease Speed
Navigate Menus
Change Settings
to decrease speed.