SR Suntour Raidon Serie Mode D'emploi page 10

SR SUNTOUR - OWNERS MANUAL
Unscrew the cable fixing bolt using a
1.5mm Allen key
Thread the cable through the outer casing
stopper and through the cover unit hole.
Tension the cable slightly and tighten it
using a 1.5mm Allen key.
Reinstall the plastic cover cap again..
Cut the cable to a proper length. Approxi-
mately 12mm is recommended.
Install a cable end cap at the end of the
cut cable using a needle nose pliers.
RAIDON / XCR /XCM / XCT / M3000AL / M2025
1.5mm
1.5mm
0.5 Nm
CUT
12mm
9
English