Kensington BungeeAir Power Guide De Démarrage Rapide page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Wireless Security Tether & Battery for iPhone®
The following pages take you through the functionality of Kensington's BungeeAir™
Power. Items in italics require the BungeeAir app to be installed on your iPhone 4.
Functionality
The following steps are recommended. These steps will allow the BungeeAir app to
trigger an immediate screen lock and require the entry of your unique passcode to
unlock the screen thus providing optimum protection for your stored information.
1. On your iPhone 4 go to Settings -> General -> Passcode Lock.
2. Set the "Require Passcode" duration to: Immediately.
3. If not enabled press "Turn Passcode On" and input a passcode.
Do not forget your passcode as you will need this if the iPhone 4 screen should lock.
When the iPhone 4 is installed in the BungeeAir case the Wireless Security Tether
system will arm. In the armed condition the Wireless Tether will provide the
following protection.
In the Armed condition:
to alarm.
and fob will cause the iPhone 4 screen to lock and the fob to alarm.
The fob alarm provides both audible and vibratory notifications.
Additional Functionality
Mute
Button
Mute: The fob audible notification can be silenced by pressing the Mute button on
English
On/Off
18
the fob. The mute will reset when the cause of the alarm has been rectified.
On/Off: The fob radio can be turned off by sliding the switch to the "Off" position
as indicated by the Red label. In this position the alarms will not activate, and the
fob and case will not communicate with each other. Remember to turn off your
BungeeAir fob where radio devices are prohibited.
"Find My iPhone 4" Operation
When the iPhone 4 is installed in the BungeeAir case the system will arm and the
"Find My iPhone 4" function will be available.
sound briefly provided the fob and case are in range.
to mute provided the fob and case are in range.
Product status
BungeeAir Fob Status Indication
The fob provides the following status indication
System Paired:
Blink Green 2 times
System Armed:
Blink Green once
System Disarmed: Blink Yellow once
Mute:
Blink Yellow when the "Mute Key" button is pressed and the fob
is alarming
Find Phone:
Blink Green once when the "Find iPhone 4" button is pressed
Fob battery low / Change fob battery: Blinks red periodically
"Find my iPhone 4"
Button
Status Indication
LEDs
19

Publicité

Table des Matières
loading

Produits Connexes pour Kensington BungeeAir Power

Ce manuel est également adapté pour:

M01125-c

Table des Matières