Starting up
4. Switching on the humidifier
– First plug in the power cable
– Turn on by pressing the switch. The monitor light on
the front goes green and humidification starts after a few
seconds
Note:
– The monitor light goes red if the water level is too low. If
so, switch off the humidifier and add water (see page 56)
– Set the room air humidity with the hygrostat controller « »
(range 20 to 90 % relative air humidity). For optimal comfort
we recommend the «ö» setting (mid-range)
– Set the nebulizer output with the «
neath
Please note the information on the next two pages.
» controller under-
59