Getting Started - Jabra Stone2 Mode D'emploi

11 . Qualified for Bluetooth® Specification version 2 .1, supporting
Headset and Hands-free Profiles for phone conversations,
advanced audio Distribution Profile (a2DP) for streaming
music and Simple Secure Pairing for pairing functionality with
mobile phone without pincode
12 . e-SCo for enhanced audio quality
13 . Up to 128-bit encryption
The device:
- on/off function is automatic . When the headset is taken out of
portable charging unit, it is on, and when it is inserted into the
portable charger, it is off . When your phone rings, you can take
the headset out of the portable charging unit and take the call
on the headset
- Charging is intelligent . the headset charges automatically when
inserted into the portable charging unit ensuring that your
headset is always fully charged ready for your next conversation
- Usage is voice-assisted . When using the headset there will be
a guiding voice instructing you i .e . how to pair up, low battery
etc .(Voice Guidance) . Furthermore you can answer/ignore calls
by using your own voice (Voice Control)
- StatusDisplay
and battery status ensures that you always know the status of
your headset and your portable charging unit
- Size of portable charging unit and headset clicked together:
H 58 mm x W 51 mm x D 25 mm
- Weight: total weight is 33g (Headset weighs 7g and portable
charging unit weighs 26g)
- Charging plug: Micro-USb 5 Pin / b type
- operating range up to 10 meters (approximately 33 feet)

GettInG stARteD

You should follow three steps before using your new headset:
1 Charge your headset (approximately 3 hours)
2 Activate Bluetooth® on your mobile phone (refer to the
manual for your Mobile phone)
3 Pair your headset to your mobile phone
You can also listen to the Voice Guidance to assist your pairing to
your Bluetooth® device .
with indicators for both Bluetooth® connectivity
tM
Jabra Stone2
4