Troubleshooting & Faq - Jabra Stone2 Mode D'emploi

2 turn your headset off manually by pressing the answer/end
button for 4-5 seconds
3 Pair device number 2 with your headset using the same pairing
instruction again
4 Connect to device 1 again
Please note that it is important to connect to device 1 again after
pairing device 2 to ensure connection to both devices .
tRoUBLesHootInG & FAQ
I hear crackling noises
- Bluetooth® is a radio technology, which means it is sensitive to
objects between the headset and the connected device . It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc .) .
I cannot hear anything in my headset
- Increase the volume in the headset
- ensure that the headset is paired to a device that is playing
- Make sure your phone is connected to the headset by tapping
the answer/end button
I am having pairing problems
- You may have deleted your headset pairing connection in your
mobile phone - follow the pairing instructions in 'Pair Your
Headset to a Phone or other Device'
Will the Jabra STONE2 work with other Bluetooth® equipment?
- the Jabra Stone2 is designed to work with Bluetooth® mobile
phones . It can also work with other Bluetooth® devices that are
compliant with Bluetooth® version 1 .1 or higher and support a
headset, hands-free and/or advance audio distribution profile
(a2DP)
I cannot use Reject call, call on hold, Redial or voice dialling
these features are dependent on the ability of your phone to
support a hands-free profile . even if the handsfree profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices . Please consult
your device manual for details
Jabra Stone2
12