Jabra Stone2 Mode D'emploi page 10

STONE2 announcements to you
"Welcome! You are now ready
for pairing . Go to the bluetooth
menu on your phone .
turn on or enable bluetooth .
Search for devices and select
your Jabra hands free device
and chose pair or oK . If asked
for a PIn code use 0000"
"Pairing failed"
"Connected to <phone name>"**
"Connected"
"Disconnected"
"Low battery"
"Power off"
** Phone dependent
Voice Guidance
announced when powered
on the first time .
repeated after 20 seconds .
Follow instructions on your
phone
announced if pairing
process fails .
announced when the
Stone2 is connected to a
named phone
announced when the
Stone2 is connected, but no
phone name is available
announced If a connected
phone is turned off, goes out
of range or has bt disabled
while in range and while the
headset is still turned on .
Low battery warning when
battery goes below 20%
charge .
to be repeated every
5 minutes
also when on a call .
announced when Stone2 is
shut down
Jabra Stone2
What it means
9