Table des Matières
Publicité
F I R S T T I M E S E T U P
I M P O R T A N T N O T I C E :
covers will melt in the Fastback® binder and cause problems.
!
Please use only the plastic cover recommended by your dealer,
or transparent sheets labeled for use in copiers.
5
II F I R S T
T I M E
A. What's Included
Your Fastback® and accessories are shipped in one box. If
any items are damaged or missing, contact your dealer
immediately. Inside the box:
•
The Fastback® Model 15xs binder
•
FB15xs Accessory Box, which contains:
-
-
-
-
-
B. Setting Up
1.
With the help of someone else, remove the binder from the
box.
2.
Position the machine on the desk, table, or counter where it
will reside. We recommend placing your binder in an area
about two by three-and-a-half feet, at desktop height.
3.
Remove the plastic book fence from the cardboard liner in the
box.
4.
Attach the fence to the Fastback® binder by aligning the two
slots in the plastic fence with the metal tabs on the book
clamp. Hold the fence on each side, and insert the tabs firmly
into the slots.
5.
Unpack the cooling rack and place it on top of the rear of
your Fastback® binder. The long, bent metal tab under the
front of the rack should be inserted in the slot above the four
printed icons.
C. Plugging In
1.
The power switch is located at the lower left on the front of
the machine. Before plugging in the Fastback® binder, make
sure the power switch is off by depressing the "O" side of the
power switch.
2.
Plug the power cord into the outlet on the back of the
machine. Then connect it to a standard, grounded 115V
electrical outlet.
Some types of plastic
F A S T B A C K ® M O D E L 1 5 x s U S E R ' S M A N U A L , R E V . C — 7 / 1 9 / 0 2
S E T U P
a Smaller Accessory Kit (includes a User's Manual,
Heat Protective Glove, Wire Tweezers, Superstrip™
Color Fan, and Comp Strip™ Color Fan)
Power Cord
Superstrip™ Assortment Pack
Plastic Book Fence
Cooling Rack
5
Publicité
Table des Matières
