Plug your oven into a standard household socket.
Make sure your oven is the only appliance
connected to the socket. If your oven does not operate
properly, unplug it from the electrical socket and then plug it
back in.
Fill a microwave safe container with
300 ml (1/2 pint) of water. Place on
the GLASS TRAY and close the oven door. If you
have any doubts about what type of container to
use please refer to page 40.
Press the
STOP/CLEAR
button, and
press the
s
START button
1 time to set
30 seconds of
cooking time.
You will hear a BEEP
when you press the button.
5
Open your oven door
.
Place the ROTATING RING inside the oven and place
the GLASS TRAY on top.
The DISPLAY will count down from 30 seconds.
When it reaches 0 it will sound BEEPS. Open
the oven door and test the temperature of the water. If
your oven is operating the water should be warm. Be
careful when removing the container it may be hot.