• Always use an assistant or mechanical lifting equipment to safely lift and position the projector.
7
Slide connection block with projector into projector mount assembly (A) as shown. Push in and
tighten captive screw to secure projector to projector mount assembly (A).
FRONT OF MOUNT
ARROW INDICATES
FRONT OF MOUNT
8
IMPORTANT: For security installations, insert one #10-32 x 1/4" socket pin screw (E) through
projector mount assembly (A) and into connection block as shown. Tighten screw with 4mm
security allen wrench (I).
E
CAPTIVE SCREW
A
WARNING
A
11 of 51
ISSUED: 09-30-09 SHEET #: 056-9024-6 08-26-14
CONNECTION BLOCK
CONNECTION
BLOCK