Installation Considerations - Thermador WDC30J Manuel D'installation

Warming Drawer 30-Inch
WDC30JS
WDC30JP
Specifications and Dimensions
Without Door
Product Width
Product Height
Product Depth w/ gasket
Cutout Width
Cutout Height
Cutout Depth
Door Width
Door Height
Door Depth
Clearance for door
opening
Electrical Supply
Required Circuit Breaker
Wattage
Power Cord Included
Power Cord Length
Shipping Weight
WDC30JS WDC30JP
29½" (749 mm)
10½" (267 mm)
22" (559 mm)
28½" (724 mm)
10" (254 mm)
23" (584 mm)
29¾" (756 mm)
11¼" (286 mm)
7
1 " (37 mm)
/
16
13
22 " (580 mm) for JP
/
16
7
22 " (570 mm) for JS
/
16
120 V AC, 60Hz
15 Amp
930
120V-3-Wire
72" (1,829 mm)
80 lbs (36 kg)

Installation Considerations

Instructions are based on standard American cabinets 36"
(914 mm) high and 24" (609 mm) deep with a 25" (635 mm)
countertop. If using non-standard cabinets, alter
dimensions accordingly.
Cabinet opening bottom must be able to support 110 lbs.
(50 kg).
Wall-Mounted Installation
®
THERMADOR warming drawers may be installed below
any THERMADOR single or double built-in oven. A
minimum space of 1" (25.4mm) is recommended between
the bottom of the oven and the top of the warming drawer.
Under-Counter Installation
THERMADOR warming drawers may also be installed
below any THERMADOR electric or non-professional gas
cooktop as long as there is no contact between the bottom
of the cooktop and the top of the warming drawer. When
installing below a THERMADOR induction cooktop, a
minimum 1" (25.4 mm) air gap must be maintained
between the bottom of the cooktop and the top of the
warming drawer.
When installing below a THERMADOR PROFESSIONAL
rangetop, a minimum 2¾" (70 mm) air gap must be
maintained between the bottom of the rangetop and the top
of the warming drawer.
®
English 3