Hard reset
4.2 - Firmware transfer under MS-DOS
•
Execute the FIRM nn _ X .BAT batch
The X in the command is the number of the serial communication port of
your PC (COM) and nn is the release number of the firmware.
This batch copies the data from the BARman
Hex file of the firmware.
Remark:
The necessary files for this transfer are in the BARMAN directory of
the P.C. to which your BARman
version of the BARman (Bxxxabcg.exe) is available on AXIOME's web site
(http://www.axiome.ch/BARman_freeware.html).
4.3 - Firmware transfer under Windows
The transfer of the firmware (after a Hard Reset) under Windows
with the "Terminal" communication program, delivered in standard together
with Windows
. The Hex file of the Firmware is in the BARman
of the P.C.to which your BARman
(Firmhelp.exe) is available at your reseller or on AXIOME's web site
(http://www.axiome.ch/BARman_doc.html).
With the AxBComm32 communication software it is very easy to download the
firmware into the BARman
, using the "Firmware update" command in the "File"
menu.
4
Chapter
into a file and sends to it the
is connected. The last firmware
can be made
directory
is connected. A help document
23