Chapter 4 : Hard-Reset; Barman -Hard Reset - axiome BARman Manuel D'utilisation

Hard reset

CHAPTER 4 : Hard-Reset

) ) ) )
The Hard-Reset on a BARman
there is no other solution (for example in case the BARman
IMPORTANT
has not been recharged for more than 2 months, see chapter
1.3.4).
When you carry out a Hard-Reset,
all the data and parameters will be lost !
   
4.1 - BARman -Hard Reset
•
Remove the plastic cap from the back of the BARman
•
To carry out a hard reset, make an electrical bridge with a paper clip
between the contact disc and the magnetic contact on the circuit (13 mm
inside the whole). Once the paper clip is removed, the BARman
bip.
•
You have now 30 seconds to transfer the firmware.
4
Chapter

should only be effected in case


.

emits a
21