Filling The Water Tank - Reality Leuchten R038-87 Mode D'emploi

III ) Fan Blade and Safety Guard
a) Place the Back Guard (6) on the Fan Head, ensuring the wire handle on the back of the guard is at the top.
b) Screw the Plastic Nut (5) to secure the Back Guard (6).
c) Place the Fan Blade (3) onto the motor spindle.
d) Fix the Blade (3) by hand tightening the Spinner (2) anticlockwise onto the end of the motor spindle. The Spinner (2) is
self-tightening when the motor starts so do not force it.
e) Place the front guard (1) into position and secure it by closing the Guard Frame (4). The screw and nut should be placed
at the bottom of the Guard.
IV ) MIST GENERATOR AND WATERTANK
a) Place the Nebulizer onto the base ensuring it is seated properly on the base.
b) Put the water tank on top of the misting generator. Fit the cover to the top of the water tank.
c) Push the end of the flexible hose into the hole in the top of the water tank cover and push in as far as you can. (Do not
kink the hose).
d) Push the other end of the hose to the mist vent located on the front of the fan grid (Do not kink the hose).
V ) FILLING THE WATERTANK
Unplug the appliance before filling and cleaning.
a) Take the water tank and turn it upside down.
b) Unscrew the filler cap and lift it up to remove, twist anticlockwise to unlock.
c) Fill with fresh clean water.
d) Refit the filler cap and turn clockwise to lock.
lmportant: Ensure the tank cap is fully rotated and locked in place.
DO NOT add any additives to the water.
DO NOT tamper with the valve in the filler cap.
e) Place the water tank back on top of the Nebulizer.
Note: The carry handle on the water tank is placed at the back.
Maintenance of Water Tank
Cleaning of water tank (once a week).
Unplug the fan before disassembling the water tank.
If there is dirt in the water tank, clean it with detergent and flush with clean water.
Make sure that the water tank is totally dry from outside before reinstalling.
Operation
24. Swing indicator light
25. Humidifier indicator light
26. Power indicator light
27. Timer indicator light
28. Airflow speed indicator light
29. Wind mode indicator light
30. Function selection area