Troubleshooting; Led States - Silicon Graphics 1600SW Guide D'utilisation

Chapter 2
2.

Troubleshooting

This chapter contains information on solving problems that you may
encounter when using the flat panel monitor. For further
troubleshooting information, see the manual that came with the flat
panel monitor's adapter board for your computer.

LED States

The LED on the left bottom side of the flat panel monitor indicates the
state of the monitor. Table 2-1 explains the LED states and offers
possible solutions if a problem occurs.
Table 2-1 Explanation of LED States
LED
No LED
State Monitor State
0 Screen
is off.
Possible Causes and Solutions
Power button is not depressed.
Power cable is not connected.
Interface cable is not connected to
the computer.
Troubleshooting EN-13