Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
6.
Slide the restraining arms in their
channel to position the cleaning head
over the tread. Notice that the pin in
the end of the arm will fit into one of
the holes in the channel, locking the
arm into place. Extend the restraining
arms to their full locked position (see
Figure 4 and Figure 5).
7.
Slide
the
TreadMaster
treadwell, making sure the restraining
arms are firmly seated against the
balustrades (see Figure 5).
8.
Use the leveling adjustment knob to
ensure proper contact with the tread
surface (see Figure 4). Check the
cleaning head level to ensure proper adjustment (see Figure 4 and Figure 6).
Figure 6. Location of Cleaning
Head Level
9.
Adjust the depth of the cleaning head with the fluted knobs on the cleaning head
(see Figure 7).
10. Remove the power cord, vacuum hose and warning sign from the storage
compartment.
into
the
Figure 5. Ensure Restraining Arms are
Firmly Seated Against Balustrades
Figure 7. Adjust Depth of Cleaning
15 - TreadMaster Owner's Guide
Head with Fluted Knobs
Publicité
Table des Matières
