SANUSLIFE ORP METER Mode D'emploi page 3

SANUSLIFE ORP METER
An instrument for the measurement of ORP values
Thank you for having purchased the SANUSLIFE ORP
METER.
With this instrument it is possible to measure the ORP
value of liquids.
We recommend that you carefully read and follow the
instructions for use.
Scope of delivery – (see page 2):
ORP meter including 2 batteries
(3-Volt lithium batteries CR2032)
Electrode storage solution
(2 containers)
Paper for cleaning the ORP sensor
Instructions for use
Description of the parts – (see page 3):
Battery compartment cap
Display
Power button
Protective cap
ORP electrode collar
ORP electrode module
Container for the electrode storage solution
ORP sensor
ORP sensor protective cap
EN
4
WARNING:
Electrode storage solution (B)
• Store at room temperature (18°C - 25°C)
• In case of contact with the skin or eyes, rinse immedi-
ately and thoroughly with water
• Do not ingest
• Keep the bottle tightly closed when not in use
USE:
1. Remove the protective cap (4).
2. Unscrew the container for the electrode storage solu-
tion (7). Attention: there must always be a sufficient
amount of electrode storage solution (B) in the con-
tainer.
3. Carefully clean the ORP sensor (8) with clean water.
4. Press the power button (3) to turn on the meter.
5. Immerge the meter in the liquid to be measured; the
ORP value will appear on the display (2)
NOTE:
• Always measure normal tap water first, and then
ECAIA water.
• Carefully clean the ORP sensor (8) with clean water
before each measurement.
• The ORP electrode module (6) is a consumable item.
Its operational life can be significantly prolonged with
proper maintenance.
5