Warranty Instructions; Safety Instructions - TBH GL 400 Manuel De Fonctionnement Et De Maintenance

2.Warranty instructions

The products from TBH are warranted to be free from defects in material and workmanship
and to meet the published specifications for 2 year from the date of shipment (brush-motors
up to 600 hours, brushless motors up to 5000 hours and GL-Series up to 10000 hours)
The opening of the motor unit or any repair activities done by none authorized persons will
automatically lead to the cancellation of the warranty.
The device has been designed, tested, and approved according to the appropriate
European and National rules and regulations.
Our declaration of conformity is attached to this operator's manual. No alterations or
modifications of any kind may be performed on the devise. Otherwise the warranty will be
cancelled.
The unit may only be used as specified by these operating instructions and for the purpose
given in them. Consequential costs, loss and damages are not covered by the
manufacturers responsibility if the unit has been used not in accordance to the given
manual.

3.Safety instructions

Please do observe the following basic safety regulations when employing
electrical appliances in order to protect yourself from electric shock, danger of
injury and fire
Please, read and observe these instructions before using the
system!
Lay a way this operation and maintenance guide !
●
Do not use the system for exhausting inflammable or explosive gasses!
●
Do not use the system for exhausting aggressive medium, and aluminum dust,
●
Do not use the system for exhausting of any liquid substances (exception: units of
●
the OEN-series )
Protect the connecting cable from heat, moisture, oil and sharp edges!
●
Observe admissible supply voltage! (cf. instructions on name-plate)
●
Use original spare parts only!
●
Use original filters!
●
Do not operate system without filter element!
●
Disconnect filter system from mains before opening!
●
The air outlet area may not be covered or blocked!
●
You pay attention that the device stands for certain!
●
If you got technical problems please contact the manufacturer or your dealer.
●
In the case of exhausting carcinogenic welding smoke, like nickel or chrome
●
containing materials, the ventilation requirements of the TRGS 560 has to be taken
in consideration ( air refeeding by handling with carcinogenic hazardous materials)
GL400-rev. 2.00 -18-
Technical changes reserved / Sous réserve de modifications techniques
Cambios técnicos reservados / Con riserva di modifiche tecniche
Technische Änderungen vorbehalten