Aqua Marina LAXO Guide De L'utilisateur page 13

INSTRUCTION FOR CARE AND STORAGE
F
The kayak is made of the highest quality materials and complies with ISO 6185 standards.
Altering the construction of the kayak will endanger your own safety, safety of the
occupants and void the limited warranty!
There is very little that you have to do to keep your kayak in good condition for many years.
• Clean your kayak after a trip to prevent damage from sand, salt water or sun exposure.
Most dirt can be removed with a garden hose, a sponge and mild soap. Make sure the
kayak is completely dry before being stored . Use as few cleaning agents as possible, do
not discharge waste agents into water, and clean your kayak preferably on land.
• The products may be stored inflated, but do not place any heavy or sharp objects on it.
Hanging the kayak is not recommended.
• Store your kayak in a dry room.
• Take protection method to keep your kayak away from rodents or other vermin, as they
may bite the product.
• The room temperature shall be maintained between 0°C (32°F) and 40°C (104°F).
G
Blade
KAYAK PADDLE ASSEMBLY
1. Place the blade piece into the shaft by unlocking the microlock. Snap it into
place and secure the microlock into the shaft hole.
2. Join the 2 shafts together by securely snapping the shaft pieces into place.
3. To disassemble, reverse the assembly steps.
Note: It's not necessary to detach the paddle blades from the shafts.
NOTE: Always drain the water left in the paddle shaft after each use.
PADDLE ASSEMBLY
Shaft
13
Shaft
KAYAK PADDLE
Blade