SKYTRONIC UBSF02-8 Manuel D'utilisation page 15

Step
6
Lift the fiberglass ring and safety net to the top of
the support poles. At each pole, click the fiber glass
rod into the opening of the pole cap, aligning at the
spaces between the casings.
Note: the pole caps should be facing outwards.
Connect the net to the v-rings of the trampoline
1.
mat using the attached clips, securing at regular
intervals. This holds the net in place for you to
complete the attachment with rope.
2. Secure one end of the rope by knotting it to the
v-ring closest to the trampoline entrance zipper
on one side.
3.
Weave the rope through the net and every second
v-ring successively, moving around the trampoline
in the direction away from the entrance zipper.
4.
When you complete the weaving and reach the
other side of the entrance zipper, secure the other
end of the rope also by knotting it to the v-ring
closest to the entrance on that side.
Your trampoline safety net is now fully secured. Follow the safety checks in the
'testing the trampoline' section before using the trampoline net.
Put warning
label here
Your Upper Bounce Trampoline is now assembled and ready to be used.
Please attach the warning label included in the box to the enclosure net and safety pad.
Make sure labels are placed at the trampoline entrance to avoid misuse of the trampoline.
SECURING THE BOTTOM OF THE NET
Fiber Glass Rod
Pole cap
Clipped pole cap