Bimar SPS-703 Notice D'instructions page 13

Fax +32 030 9904733
Trouble
The humidifier is not working.
The humidifier is on, but no
vapour is coming out
Abnormal smell mist
The appliance is on, but the
humidifier is not working.
Mist fog is too small
Abnormal noise
Mist coming out from around
nozzle
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
Possible reasons
No power supply
No water in water tank
Security switch is too slight
New unit
Dirty water or long time
staying water
Too much water in the water
basin
Too much scum in the water
basin
Water is too dirty or water kept
too long in the tank
Resonant in water tank when
water is too less
Unit is on an unstable surface
There are apertures between the
nozzle and water tank
13/36
Assembly page 13/36
Shooting Way
Connect power supply, switch
on
Fill water into water tank
Make the switch tight
Take out water tank, open
cover, let it stay 12 hours in
cool position
Cleaning water tank, fill in
clear water
Pour away some water from the
water basin, closed the cover of
water tank tightly
Clean transducer
Clean water tank, change to
fresh clear water
Fill water into water tank
Move the unit to a stable flat
surface
Dip the nozzle in water for a
while and then fix it to the
socket on water tank