Installation - Hiyasu CA 90 Manuel D'instructions

ManualCortinaHiyasuEng 2/5/05
A- Installing on the concrete wall:
1- Remove the mounting plate.
It can be removed by unclamping the screw on the back of main
body.
Unit body
Outflow opening
Hook eyelet
3- When the cement has freeze, fit the mounting plate (use the washer
and nut according to the following).
Washer
B- Installing on the wooden wall:
1- Fix the mounting plate in the proper positions with tapping screw.
Wood screw
Washer
(large)
22
18:17 Página 22

INSTALLATION

Wall mounting
plate
Guide groove
Angle adjustment
screw
15
Aprox.
mm
70 mm
Sink bolt
20 mm o más
Wall mounting
plate
2- Fix the bolts in the proper position.
(Decide the position with the mounting plate and pour cement into
the bolt holes).
Cement
70 mm
15-20 mm
4- Install the main body.
Set the main body onto the upper end of the mounting plate and
clamp it as shown.
Unit body
10°
Aprox.
Angle adjustament screw
2- Same as the step 4 of A.
Unit body
10°
Aprox.
Angle adjustament screw