Extraflame COMFORT IDRO L80 Manuel D'instructions page 28
Masquer les pouces
Voir aussi pour COMFORT IDRO L80:
- Manuel d'instruction (58 pages) ,
- Manuel utilisateur (44 pages) ,
- Manuel utilisateur (40 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12
Thread the elements assembled in the previous step (figure 11) through the opening intended for the loading kit.
Place the kit (C) against the lower wall of the housing hole. Secure the front door using the 3 screws supplied in the kit.
Then secure the front panel (D) of the kit using the 8 screws (not supplied). Use the existing holes for fastening.
Insert the flexible tube (A) on the flange attached to the structure (B).
onlY for recommended insTallaTion
28
28
ENGLISH
3 screws supplied
Publicité
Table des Matières
