Specifications; Before First Use; First Use; Description Of Heater - MILL SG1200 Wifi Mode D'emploi

4 4
Specifications
Power
Model Thermostat Color Amperage (W) Fan WiFi
SG1200WIFI
WiFi White 220-240V ~ , 50-60Hz 1200 Yes 802.11 b/g/n
Maximum transmitting power: ≤20dBm
Frequency range: 2400-2483.5MHz
Before first use
A er unpacking the heater, check to make sure the product was not damaged during
transport. Contact the retailer or importer if you discover any visible damages to the product.
Keep the outer packaging to transport the heater in the future. If you want to dispose the
packaging, make sure it is done properly. Keep plastic bags away from children.

First use

A er turning on the heater for the first time or a er an extended period without use,
the heater can produce a burnt odor for a short time. This is normal.
Please read all the instructions carefully before use. Save the instruction manual for future
use.
It is also normal for the heater to make "sounds" when it warms up or cools down.

Description of heater

See figure 1 on separate illustration sheet
1. Heat emission
2. LED display
3. Thermostat + WiFi button
4. Fan
5. ON/OFF
6. Legs (aluminium)

Parts

See figure 2 on separate illustration sheet
1. 8 screws (pre-mounted)
2. 2 foot brackets
3. 2 rails for the feet