Faster Multifaster P1 Serie Livret D'instructions page 37

E MULTIFASTER DOES NOT CONNECT
E1
Check if the lines are under pressure.
In order to connect
pressure, it is necessary to act on the lever with a higher force.
Instead,
effort.
E2
In case you are not able to get a manual connection
EXTENSIONS OR OTHER TOOLS:
components may occur.
E3
Decrease the pressure by unscrewing slightly the fittings.
Do not use sharpened tools to pull back the coupling valve: damages
to seals may occur.
If lines are not under pressure, ensure that the lever D or the
E4
reference pins C are not damaged. In case, replace them.
F MULTIFASTER DOES NOT DISCONNECT
F1 PUSH THE SAFETY LOCK BUTTON
BEFORE LIFTING THE LEVER !
Check that there is no pressure on the lines and replace the levers.
DO NOT USE EXTENSIONS OR OTHER
TOOLS TO FORCE DISCONNECTION.
MULTIFASTER
MULTIFASTER
Ensure that the levers are not deformed.
JUST ACT ON THE
SAFETY LOCK BUTTON.
W A R N I N G !
of 2P... series with the lines under
of 3P... series are connectable without
damages to the lever or other
W A R N I N G !
W A R N I N G !
37
DO NOT USE