Recommendations - Faster Multifaster P1 Serie Livret D'instructions

1.

RECOMMENDATIONS

Improper use and/or incorrect maintenance of products working with
high internal pressures cause malfunctionings and damages to people
and machines.
Therefore it is necessary to carefully conform to the simple instructions
given in this handbook replacing, in case, the faulty or worn
®
components by original FASTER spare parts.
MULTIFASTER
system is characterized by having a lever with
integrated cam in order to perform connections even with hydraulic
lines under pressure.
MULTIFASTER
Before using the ensure that its working pressure is
suitable for the application.
This check activity has to be carried out both on the single couplings
and on the whole lines.
MULTIFASTER 2P... series
: consider that during the connection
phase a volume reduction occurs in the male coupling, causing a
pressure increase depending also on the oil quantity in the circuit. For
this reason it is necessary to act on the lever with a higher effort.
MULTIFASTER 3P... series
: thanks to the new 3 series male
couplings no volume reduction occurs, in this way connection effort
even under pressure is comparable to the one without pressure inside.
Carefully clean both the fixed and the mobile part before each
connection in order to ensure a longer service life to the seals.
Check that all working components are properly cleaned and greased.
Be sure that the safety lock releases once connection is
completed.
During the disconnection phase hold the lever in a firm way in order to
prevent any reaction due to the internal working pressure.
MULTIFASTER
Once is disconnected, close the protective dust cap
assembled on the fixed part and place the mobile part onto its specific
support (available on request).
All technical data regarding working performances of the
MULTIFASTER
are included in the specific Multifaster catalogue n°
0111.
D
ATA AND DRAWINGS WITHIN
THIS HANDBOOK ARE FOR
.
INFORMATION ONLY AND NOT BINDING
21