Thermal Protector; Machine Maintenance - Nobles ASPEN 6 Manuel D'utilisation Et Carnet De Pièces Détachées

THERMAL PROTECTOR

The machine is a equipped with a resettable thermal
protector located at the bottom of the machine. It is
designed to protect the motor from overheating should
the airflow be blocked for an extended period.
This may occur if vacuum bag is overfull, vacuum hose
is blocked or filters are clogged. If thermal protector
trips, turn off the power switch, unplug power cord and
check for airflow blockage. Remove blockage and allow
motor to cool for up to 3 minutes.
To reset the thermal protector, push the reset button
with a pointed object as shown.

MACHINE MAINTENANCE

To keep machine in good working condition, simply
perform the following maintenance procedures.
WARNING: Unplug cord from outlet when not
in use and before servicing machine.
1. Check vacuum bag for fullness.
Nobles Aspen 6, Aspen 10 (01- 2015)
2. When replacing a full bag, cover the bag opening
with the self- adhesive flap to contain the dust for
disposal.
3. Remove the cloth filter bag and clean regularly.
Turn bag inside out and tap off any dust buildup.
Do not wash cloth bag. Replace bag if worn or
damaged.
For optimum filtration and dust containment,
always use a paper bag with cloth bag.
4. Replace HEPA filter every six months. HEPA filter
cannot be washed for repeated use.
English EN
9