Bradley S19314 Serie Manuel D'installation page 11

Installation
2 Assembly — Connect Drench Shower Components
Standard eyewash unit is shown. Other units are similar.
Apply pipe sealant (supplied by installer) to all male-threaded pipe
joints, making sure not to get any excess over the edge of the pipes.
BSPP = British Standard Pipe Parallel Thread (not available in the
U.S.)
Showerhead with
stainless steel
shroud option
Bradley • 215-1684 Rev. T; ECN 18-05-015
Stainless
steel tee with
reducer
Use teflon
tape only.
BSPP-NPT
1-1/4" Adapter
if supplied
with provided
option
1¼" NPT below supply inlet
1" outlet
26" (660mm)
for shower
pipe length
Alternate 1¼" NPT below
If this tee is used as the
supply inlet, use the plug
on the top supply inlet
and use BSPP adapter
here if supplied with
26" (660mm)
pipe length
4/9/2018
S19314
supply inlet
provided option.
11