9. If the power cable insulation is broken, please stop using the product! Immediately unplug the
unit and contact the retailer you purchased it from.
10. The product is equipped with a circuit breaker for short circuit or overcurrent situations. The
circuit breaker will automatically shut down the product at once. All outlets of the product have a
safety ground.
11. Do not install the enclosure near any heat source.
12. Do not block any ventilation openings.
13. This product is a Safety Class I Controller. The main plug should be inserted in a power socket
outlet only if it is provided with a protective earth contact. Any interruption of the protective
conductor inside or outside of the product is likely to make the product dangerous and is
prohibited.
The included 12 volt DC power supply connects to a temperature controller so the CO
disabled when fans are in operation. If you are not using a temperature controller device with the CO
controller, the 12 volt AC adapter should not be used.
The 12 volt power supply shown above is an optional feature that allows the user to link the CO
controller to an environmental controller to disable the CO
operation.
INSTRUCTIONS
IMPORTANT NOTICE
12 VOLT DC POWER SUPPLY
output when the exhaust fans are in
2
device will be
2
2
2
7